Electrical Cable & Wire Use Chemical Raw Material Chlorinated Polyethylene CPE Rubber

• Customization: Available
• CAS No.: 64754-90-1
• Formula: C4h7cl
• Model NO.: 135B
• Certification: ISO9001
• Environmental Protection: Yes
• Color: White
• Kind: Plastic Flame Retardant
• Appearance: Powder
• Transport Package: Bags
• Specification: 25kg/bags
• Trademark: boleid
• Origin: China
• HS Code: 39019090
• Production Capacity: 3000 Mt a Month

Product Description

Product Introduction
CPE is chlorinated polyethylene, which is produced by chlorination of high-density polyethylene (HDPE). It is a product that partially replaces the hydrogen atoms in the HDPE molecular chain with chlorineatoms.
Appearance is white powder, non-toxic. CPE molecular formula CH2-CHCl-CH2-CH2 ]n, English abbreviation: CPE or CM Chlorinated polyethylene (CPE) is a saturated polymer material.

Technical Indicators

Parameter	Unit	Test Standard	CPE-135B
Appearance	--	Visual Inspection	White Powder
Chlorine Content	%	--	35±2
Surface Density	G/Cm³	GB/T 1636-2008	0.50±0.10
Sieve Residue (0.9mm Mesh)	%	RK/PG-05-001	≤0.2
Volatile	%	RK/PG-05-003	≤0.4
Residual (750ºC)	%	GB/T 9345-2008	≤5.0
Tensile Strength	MPa	GB/T 528-2009	8-13
Elongation At Break	%	GB/T 528-2009	>800
Hardness Shore A	--	GB/T 531-2008	≤65

Products Features
1. Excellent elongation at break and excellent powder fluidity;
2. Give PVC products good toughness;
3,Excellent hardness and tensile strength.
Because the CPE molecule does not contain double chains, it has good weather resistance, flame resistance, and thermal stability better than PVC, with low cost and excellent performance. Soluble in aromatic hydrocarbons and halogenated hydrocarbons, insoluble in aliphatic hydrocarbons, decomposes above 170°C and releases hydrogen chloride gas. It has a stable chemical structure, excellent aging resistance, flame resistance, cold resistance, weather resistance, free colorability, and It has chemical resistance, ozone resistance and electrical insulation as well as good compatibility and processability. It can be blended with PVC, PE, PS and rubber to improve its physical properties.

Performance impact
First: the type of PE used - CPE made from high molecular weight polyethylene has higher viscosity and tensile strength, but the adhesion between this CPE and PVC resin is low. It is made from low molecular weight polyethylene. The viscosity and tensile strength of CPE are low, and CPE made of high-density polyethylene has good heat resistance.
Second: the size of the raw material particles - if the particle size is too small, it will easily form gel or agglomerated CPE. If the particle size is too large, the distribution of chlorine will be uneven and it will be difficult to dissolve in organic solvents. The particle size range is 0.1-200 μm. good.
Third: The degree of chlorination of CPE ----- When the chlorine content is below 25%, it has poor compatibility with PVC and cannot be used as a modifier; when the chlorine content is greater than 40%, it has good compatibility with PVC and can be used as a modifier. It is used as a solid plasticizer and is not suitable as an impact modifier; CPE with a chlorine content of 36-38% has good elasticity and compatibility with PVC, so it is widely used as a PVC impact modifier. The most commonly used CPE is CPE containing 35% chlorine. CPE with a chlorine content of about 35% has low crystallinity and glass transition temperature, has good rubber elasticity, and has suitable compatibility with PVC. It is widely used as Impact modifier for PVC hard products.

CPE has a stable chemical structure, excellent aging resistance, flame resistance, cold resistance, weather resistance, free colorability, chemical resistance, ozone resistance and electrical insulation, as well as good compatibility and processability, and can be used with PVC, PE, PS and rubber are blended to improve their physical properties.

Storage and transportation conditions

Packaging can be customized according to customer requirements.
Keep container tightly sealed and store in a cool, dry place.

Company Profile
Bontecn Group China  Co., Ltd., formerly known as Longyang Chemical, was established in 2003, is a professional manufacturer of plastics, rubber auxiliaries, is a collection of scientific research, development, sales, service, investment as one of the specialized enterprises.

Main Products
Bontecn Group China was established in 2003 by Longyang Chemical. Each company in the group is engaged in the production of PVC additives and rubber and plastic additives. It is a professional group enterprise integrating scientific research, development, sales, service and investment.

Our Advantage
In recent years, the company's R&D and technological investment in rubber and plastic and ABS additives has increased year by year. While the total amount and intensity of R&D investment have maintained double growth, the R&D investment structure has also continued to improve. Optimized. In terms of hardware, the company has purchased internationally advanced automated production lines and testing equipment, and is committed to developing products with internationally advanced standards. The raw materials required for production are also purchased from the world's top technology manufacturers, with stable and reliable quality.
At present, the company has 5 senior R&D personnel, more than 20 intermediate R&D personnel, and a collaborative team of more than 20 people. Now the company is jointly developing new products with well-known foreign companies. This product can solve the problems of troublesome and high cost of traditional plastic formula ingredients, and has achieved remarkable results. With advanced process technology and complete testing methods, we continue to explore, devote ourselves to research and development, and cooperate with scientific research institutes all year round to con.

At present, the company has 5 senior R & D personnel, more than 20 intermediate R & D personnel, more than 20 collaborative teams and achieved many excellent results.Now the company and foreign well-known enterprises jointly develop a new product, the product can solve the traditional plastic formula ingredients trouble and high cost problems, and has achieved significant results. With advanced process technology and perfect detection means, we continue to explore, concentrate on research and development, and cooperate with scientific research institutes all year round to continuously develop new products and new processes.

FAQ
Q: Do you offer free samples?
A: You only need to provide the address and freight, and we will send the free samples to your address.
Q: Are you a manufacturer or trader?
A: We are a manufacturer with our own laboratory and factory. We have two production plants in Weifang and Zibo, Shandong. You are welcome to visit our factory at any time.
Q: How soon can I receive the goods after payment?
A: If it is a small batch of products, we will send it to you by international express (DHL, FedEX, TNT,etc) or by air, which usually takes 3-5 days. We will ship large quantities of products to you, which usually takes a few weeks. The specific situation depends on the port. If you have special needs, you can also contact us.
Q: How do you package, store and ship?
A: We usually use PP bags with a capacity of 25kg, or customize packaging according to customer requirements. Products should be kept clean during transportation, loading and unloading, protected from sun, rain, high temperature and humidity, and packaging damage. It should be stored in a cool, dry, and direct sunlight warehouse below 40°C. The shelf life is two years. It can still be used if the performance test is passed after the shelf life.
Q: How do you ensure the quality of your products?
A: We always believe that integrity and responsibility are the foundation of enterprise development, so we strictly control the production process to ensure that the products provided are qualified. Our products have passed ISO9001 and other agency certifications, and have our own laboratory testing to ensure product quality.
tinuously develop new products and new processes.