Sell Plastic Impact Modifier PVC Additive CPE135

Product Details
Customization: Available
CAS No.: 63231-66-3
Formula: -CH 2-Chcl-CH 2-CH 2-
Still deciding? Get samples of US$ 2.07/kg
Request Sample
Manufacturer/Factory
Gold Member Since 2022

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
186000000 RMB
Plant Area
1001~2000 square meters
  • Sell Plastic Impact Modifier PVC Additive CPE135
  • Sell Plastic Impact Modifier PVC Additive CPE135
  • Sell Plastic Impact Modifier PVC Additive CPE135
  • Sell Plastic Impact Modifier PVC Additive CPE135
  • Sell Plastic Impact Modifier PVC Additive CPE135
  • Sell Plastic Impact Modifier PVC Additive CPE135
Find Similar Products
  • Overview
  • Product introduction
  • About the Company
  • Product advantages
  • Technical indicators:
  • Product application
  • Packaging and storage
  • Certification data
  • common problem
Overview

Basic Info.

Model NO.
CPE-Y/M
Certification
ISO9001
Environmental Protection
Yes
Color
White
Kind
Plasticizer
Appearance
Powder
Transport Package
25kg
Specification
25kg/pack
Trademark
boleid
Origin
China
HS Code
3901909000
Production Capacity
500 Mt a Month

Product Description

Product introduction

       Bontecn Group China CPE is a kind of special rubber with high performance and quality. The products produced have a long service life and ultraviolet resistance. No matter how bad the environment and climate are, they can maintain the inherent performance of rubber for a long time. CPE developed by our company has excellent elongation at break and excellent toughness. This strain is a saturated thermoplastic resin with irregular structure, which has good extrusion fluidity when mixed with PVC, and is suitable for PVC hard products and molded products. Compared with general CPE on the market, Bontecn Group China CPE has the characteristics of low glass transition temperature, superior processing performance and high elongation at brak.

 

Sell Plastic Impact Modifier PVC Additive CPE135

About the Company
Bontecn Group China, formerly known as Longyang Chemical, was established in 2003. It is a group company specializing in the production of plastics and rubber additives. It is a professional enterprise integrating scientific research, development, sales, service and investment
The company is committed to developing products with international advanced level, and the raw materials needed for production are also purchased from the world's top technology manufacturers, with stable and reliable quality. At present, the company has 5 senior R&D personnel, more than 20 intermediate R&D personnel, and more than 20 cooperative teams With advanced process technology and perfect detection means, we constantly explore, devote ourselves to research and development, and cooperate with scientific research institutes all the year round to constantly develop new products and processes At the same time, we have established a strict production control system and quality management system, adhere to the market-oriented and user centered business policy, and strive to provide customers with satisfactory products and considerate services. Our products have been exported to North America, Latin America, the European Union, Asia Pacific, Africa and other countries and regions Since its establishment, the company has been deeply praised and recognized by customers at home and abroad with the business philosophy of "promoting development with quality and cooperation with integrity", and has won a good reputation in the industry
Sell Plastic Impact Modifier PVC Additive CPE135

 


 

Product advantages

CPE-Y product advantages

1. Promote the plasticization of PVC mixture
2. Good elongation at break and toughness
3. Improve the surface finish of the final product
4. Gives PVC products excellent strength and hardness, and significantly improves the compressive strength of the line pipe

CPE-M product advantages

1. Low consumption, 75% - 80% of pure material CPE;
2. Obviously improve the toughness of the product;
3. Promote the plasticization of PVC mixture;
4. Excellent elongation at break and toughness;
5. Improve the cost performance ratio of products;

Technical indicators:

parameter

measurement Test standard CPE-Y CPE-M
Product appearance -- -- White powder White powder
Apparent density g/cm3 GB/T 1636 0.5±0.1 0.30
Sieve residue (30 mesh) % GB/T 2916 2.0 2.0
Volatile matter % ASTM D5668 1.5 1.5
Residual (750 oC) % GB/T 7531 5.5±1.0 6.0
tensile strength MPa GB/T 528 6.0±2.0 4.0
elongation at break % GB/T 528 1100±100 ≥1600
Hardness Shore A -- GB/T 2411 62±3 --
 

 

 

 

Product application

 

CPE-Y is applicable to PVC hard products and molded products. It is almost crystal free and has excellent flame retardancy, electrical insulation, chemical resistance, oil resistance and water resistance; It has good compatibility with PVC, CR, NBR, etc.
CPE-M is applicable to flame retardant of ABS products, wire and electric appliance shells, soft PVC foaming materials, special synthetic rubber, modifier of general synthetic rubber, plasticizer of PVC and other plastics
Sell Plastic Impact Modifier PVC Additive CPE135
Packaging and storage

 

 

25Kg/bag. The product shall be kept clean during transportation, loading and unloading to prevent exposure to the sun, rain, high temperature and humidity, and to avoid damage to the package. It shall be stored in a cool, dry warehouse without direct sunlight and at a temperature lower than 40oC for two years. After two years, it can still be used after passing the performance inspection.

Sell Plastic Impact Modifier PVC Additive CPE135
Sell Plastic Impact Modifier PVC Additive CPE135
Sell Plastic Impact Modifier PVC Additive CPE135

 

Certification data

 

Sell Plastic Impact Modifier PVC Additive CPE135
Sell Plastic Impact Modifier PVC Additive CPE135
common problem

1. Can you provide samples to customers for free?
Yes, we can provide free samples to help you with the test, but we need to charge the freight.
2. How to order products?
You can ask us about product prices and product questions online, and we will reply to your questions as soon as possible.
3. Does the testing process provide technical assistance?
Yes, we have a professional technical team that can assist you in sample testing and provide technical assistance to customers.
4. Some product transportation problems:
For the samples you need, we can deliver them to you through international express delivery such as Shunfeng, Deppon, etc. For bulk goods purchased in bulk, we will ship them to you by sea. You can inform us in advance of your nearest port, and we promise to deliver them to you.
5. How to save the product?
During loading and unloading, keep it clean to prevent exposure to the sun, rain, high temperature and humidity, and to avoid damage to the package. It shall be stored in a cool, dry warehouse without direct sunlight and at a temperature lower than 40 ºC for two years. After two years, it can still be used after passing the performance inspection.
6.Are you a production company or a trader?
 Hello, we are the manufacturer.
 

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier